Features:

• LoadKing 3.5 riser connector is rated for 3.5 million pounds tension load.
• Coupling makeup will not slow down riser running time. The couplings can be preloaded in 2 minutes or less.
• All LoadKing riser connectors are prepped for up to six, fixed choke, kill line and auxiliary line positions. In sizes from 2 inch O. D. through 6-3/4 inch O.D.
• Replaceable seal subs can be mounted in either flange for running pin up or box up. Forged bolts have a blunt start machined onto the threads and a trash groove to reduce the chance of galling due to contamination or minor damage to the threads.
• Nuts are installed on one end and retainers in the other, so that bolts are retained and there are no loose parts. If desired, the retainers can be installed without threads and the bolts can be removed each time the riser is retrieved.
• Nuts are designed to distribute the loads evenly through the thickness of the nut. This increases the nuts' and bolts' fatigue resistance.
• Corrosion-resistant segmented clamps reduce weight and maintenance.
• Trims with temperature ratings of -20 degrees F. To +250 degrees F. Meet NACE MR01-75 requirements.
• Free riser tension table provided with every riser system purchase.